Water damage is generally unexpected and quite aggravating. There are numerous indicators, such as warping, discolouration, and odour. It’s time to take action as soon as you see the damage.
When should you seek the assistance of a professional? You know that action is needed to prevent future complications.
Water damage to homes is more common in Queensland and other regions prone to natural disasters such as hurricanes. Time is essential, regardless of the cause of your water damage. If you need assistance figuring out what to do next, we’re here to help.
Checking for Water Damage
Water damage may or may not be immediately apparent, depending on the circumstances. Inspect the immediate area surrounding the target first. If you see any of the following indicators, you are dealing with water damage:
- Warping – If you notice bubbles, peeling, or fissures on the floor that did not exist before the incident, you most likely have water damage.
- Discolouration – Examine your floor for new stains or changes in colour. Dark patches could be caused by mould or mildew.
- Crowning – Crowning occurs when your floor planks become rounded, with a high point in the middle and a low point at the edges.
- Buckling occurs when the floor separates from the subfloor beneath it. It may split along the seams or peel upwards.
- Cupping – The edges of your floor planks may bend upward when they collect water. It implies that your floor has absorbed moisture.
- Odour – If your floor has a noticeable and unpleasant smell, this usually indicates mould or mildew growth.
How Soon Should You Fix Your Water-Damaged Floors?
The floor can be repaired rather than completely replaced if the damage is minor. When deciding between repairing and replacing, there are several factors to consider. It is best to think about fixing anything when any of the following apply:
- The water damage is minor. Damage to your floor might be minimal to the surface if the water wasn’t there for too long. Replacement can be unnecessary if the floor is still serviceable and has not deteriorated.
- The water is pure. It’s safe for human consumption. In some instances are flooded due to an overflowing toilet. A leaking pipe might also provide clean water.
- The water-damaged area is dried within 48 hours. If the water on your floor dries within 24 to 48 hours, you are most likely concerned about mould or mildew.
Before beginning any repair, you should ensure that the area is completely dry by utilising a fan or a dehumidifier. Failure to wait until it is completely dry may result in mould or mildew issues later on.
When Should You Replace Water-Injured Floors?
Large catastrophes, such as a natural disaster or a broken water heater, usually indicate that it is time to replace the floor. Whatever the origin of your water damage, you must decide whether it is time to replace rather than repair it.
Consider the following reasons for replacement:
- There is considerable water damage. Inspecting the area, you can tell if there has been significant wear and tear. If your subflooring has become swollen or elevated, it is time to replace it.
- The water is filthy. Black water has been contaminated in some way, whether by human waste or the environment. The level of bacteria in this water is dangerous and will nearly always necessitate replacement.
- The area has been wet for a long time. Mildew or mould can grow if water remains damp on a floor for more than 48 hours.
How to Know When to Get Help from an Expert
Whether you undertake the project yourself or hire a professional is determined by your skill level, the urgency of the assignment, and the amount of time you have available.
Reztor Restoration is the company to call if you need to replace your floors quickly due to serious damage and mould or mildew issues. It will protect you and your family from any health problems. You should not undertake a major project like floor replacement if doing so may expose you and your family to harmful mould or mildew.
You can save money and time by fixing the problem yourself if it is a simple project and there is no risk of mould or mildew.
