You probably don’t think about how water damage can affect your carpet if there’s a leak in your home. The moisture from a burst pipe, running toilet or flooded basement could seep into the padding. That will cause a mould infestation, which can be very expensive to clean up.
But if your water damage is limited to the surface of the carpet, you can save it with these steps:
First, Turn off all Water, Gas and Electrical Plugs to Prevent Further Damage:
Unplug all electrical items like a washing machine or a dishwasher and turn off the circuit breaker before tackling the damage to avoid electrocution.
Remove Wet Items:
Once you turn off the water, it may take some time before the carpet is completely dry. Remove the flooded carpet to allow it to dry more quickly, or move the wet carpets to a less-trafficked area of your home.
Vacuum Thoroughly Using a Vacuum Cleaner Designed for Carpets:
Avoid using a hairdryer to dry the carpet, as it can cause damage to the padding. Instead, try using a wet-dry vacuum or any vacuum designed for carpet water extraction.
You can rent one from local hardware or department store. It will suck up water and prevent it from drying deeper into the carpet and padding and causing additional damage and odours.
Remove Odours with an Odour Eliminator Spray Designed for Carpet:
Odour eliminator sprays are available at most local hardware and department stores. They are specially formulated to remove odours from the carpet.
Treat and Deodorise all Carpets and Padding to Prevent Future Odours:
You can use commercial carpet deodorisers to treat all of the padding and carpet. However, they cannot smell the difference between natural and synthetic odours, so you should also apply a deodoriser to any furniture or other items your family might sit on.
Dry-clean all Carpets and Padding Following the Manufacturer’s Instructions:
To prevent future stains, you should dry-clean your carpets and padding following the manufacturer’s instructions.
Replace any Tack Strips, if Needed:
Inspect the tack strips along the edge of the carpet to ensure they are secure and there is no mould or mildew on them before replacing them.
Tack strips need to be scraped clean of old adhesive and then reapplied to their original position. You can also use household glue that dries clear to reattach any tack strips that have come loose from heavy traffic or over time.
Repair any Water Damage to the Floor:
The moisture could have seeped into the floor, causing warping or other structural issues. As a result, you may want to hire a contractor to help you fix it. Besides, having to replace the floor also costs money.
If in Doubt, Call in a Professional to Complete the Job:
If you’re unsure how to dry-clean your carpets and padding, it’s best to call in a professional. Not doing so could lead to additional, unnecessary damage.
If you have any questions, contact a professional carpet cleaner or a restoration specialist. They have the expertise to help you preserve your home’s carpets and other damaged items.
TO WRAP IT UP
The steps above will prevent you from paying a hefty cleanup bill. If you have any questions, contact a professional carpet cleaner or a water damage restoration specialist. They have the expertise to remove excess water. Thus, they can help you preserve your home’s carpets and other damaged items.
If you have water damage and your carpet is not salvageable, the best option is to hire a company and let them handle the job. Water damage can be very costly to fix, and hiring a professional is usually better than trying to do it on your own.
Anyone can clean up water damage, but it can be a complicated process and requires inside knowledge inside your home. I hope this guide was helpful for people who want how to treat flood-damaged carpets. Also, don’t forget to share this guide with your friends and family members online.