Reztor Restoration 24/7 emergency1800 739 867
Call 24/7 Send photos
Brisbane & South East QueenslandWater damage clean-up Brisbane
01 Start beneath the surface

Water damage clean-up in Brisbane. Act before mould starts.

Water in your home right now? Call 1800 739 867 — help is available 24/7. Reztor’s own team handles water damage clean-up across Brisbane, from water extraction and moisture mapping through monitored drying. The initial assessment is $198.

Make the area safe first. Keep clear of wet power points and appliances. Stop the source only if safe. If anyone is in danger, call 000.

Assessment + dryingIllustrative Brisbane water damage clean-up assessment
Look beyond the surface. We assess carpet, underlay and accessible subfloor before deciding what can be dried in place.
Process illustration
01 / CONTACT24/7 contactCall any time
02 / STANDARDIICRC Certified FirmMeasured restoration
03 / PEOPLEOur own teamNo subcontracting
04 / EXPERIENCERestoring since 2012Australian properties
02 Clean-up vs flood clean-up

A dry surface isn’t the whole story.

Underlay can hold water after the carpet pile feels dry. Skirtings and the floor beneath may need attention too.

What you can and cannot finish yourself

You can mop up small amounts of clean water and move belongings. The difficulty is water you cannot see in underlay, wall cavities and subfloors — that is where moisture readings matter.

Where moisture can hide beneath carpetAn illustrative building cross-section showing carpet, underlay and subfloor, with moisture moving below the apparently dry carpet surface. ILLUSTRATIVE SECTION / NOT TO SCALE Carpet pileUnderlay can retain moistureSubfloor Where moisture can hide beneath carpetA vertical illustrative cross-section showing the carpet surface, underlay that may retain moisture, and the subfloor below. ILLUSTRATIVE SECTION / NOT TO SCALE 01 Carpet pileThe surface may feel dry. 02 Underlay + subfloorRead for retained moisture beneath.
Read the layers, not just the surfaceMoisture pathways vary with the water source, materials and construction.

What causes indoor water damage clean-up jobs?

The visible patch is only one clue. Tell us where the water came from, when it started and whether it is still entering.

  1. Burst pipe or appliance leakIndoor water events need extraction and drying even when the surface looks manageable.
  2. Storm water through the buildingEntry path and contamination change the clean-up plan.
  3. Small leak that spreadHidden moisture can remain after DIY mopping.
  4. Fans and heatersFans help only for clean water once electrics are safe — they rarely finish underlay or walls.
  5. Insurance questionsSudden accidental damage is often discussed with insurers; slow leaks may not be covered. Your insurer decides.
  6. Getting help nowCall with your suburb, water source and wet rooms — help is available 24/7.
03 The drying plan

Five steps.
No guesswork.

The water source, affected materials and site conditions shape the work. Each step builds a clearer picture of what happens next.

  1. 01

    Inspect

    Map wet rooms, source and contamination category.

  2. 02

    Extract

    Remove standing and held water from floors and accessible materials.

  3. 03

    Dry

    Dry underlay, walls and other retained materials with monitoring.

  4. 04

    Monitor

    Return readings guide when equipment can come out.

  5. 05

    Document

    Assessment and drying records for your claim discussion.

04 The hidden picture

See what the surface can’t tell you.

A wet patch is one clue. Moisture readings show where water has travelled; extraction and drying address what comes next.

Illustrative indoor water damage before clean-up and extractionAssess
Moisture readings and source check before drying.
Illustrative drying setup during Brisbane water damage clean-upDry
Dehumidifiers and air movers, checked against readings.

Side-by-side illustrations of assessment and drying. Not documentary Reztor job photos.

05 Connected work

Connected water damage services.

Once we understand the source and affected materials, we explain the applicable next steps.

01 / WATER

Water damage restoration

Assessment, extraction and structural drying shaped around the affected rooms and materials.

Water damage services
02 / EXTRACT

Water extraction

Standing water removal, then moisture testing and drying — extraction alone is not the full job.

Water extraction
03 / MOULD

Mould assessment

If growth is present or likely, we investigate the moisture and affected materials before remediation.

Explore mould remediation
04 / RECORDS

Insurance documentation

Photos, readings and job records help explain the damage and work. Your insurer decides policy coverage.

Read about insurance claims
06 Brisbane clean-up response

Across Brisbane homes and businesses.

Call with your suburb and what happened. We confirm attendance and the next step for your address.

Reztor Australia Pty Ltd
9/35 Learoyd Rd, Acacia Ridge QLD 4110

Brisbane service area Confirm your address

Call 1800 739 867 with your suburb, where the water came from and which rooms are wet. Help is available 24/7. No suburb directory was present on this page to preserve.

Not sure which area applies? Check service areas or call 1800 739 867.

07 Good to know

Questions, answered plainly.

Every property is different. Call with your suburb, what happened and whether water is still entering.

01What is the difference between water damage clean-up and flood clean-up?

Water damage clean-up is for water that starts inside or enters through the building, such as a burst pipe, a leaking appliance or storm water through the roof. Flood clean-up is for floodwater that comes in from outside at ground level, which is treated as contaminated. Both start with safety, extraction and moisture checks.

02Can I clean up a small leak myself?

You can mop up small amounts of clean water and move belongings out of the way. The difficulty is the water you can't see in underlay, wall cavities, cabinetry and ceilings. If an area stays damp or smells musty, or water has spread beyond one spot, a moisture check is worthwhile.

03Should I turn on fans or a heater?

Fans can help with clean water once electrical hazards are ruled out, but they rarely dry underlay, walls or subfloors fully. Don't run fans over water from a toilet, sewage or storm runoff, because they can spread contaminants. Heaters can make conditions worse for mould if moisture is trapped.

04Will insurance cover water damage clean-up?

Sudden and accidental damage, such as a burst pipe, is often covered, depending on your policy. Slow leaks over time may not be. Your insurer decides cover. We provide photos, moisture readings and notes about the work to support your claim.

05How do I get help now?

Call 1800 739 867 . Tell us your suburb, where the water came from and which rooms are wet. Help is available 24/7, and the initial assessment is $198.

08 Start with clear details

Tell us what’s happened.

Share the site address, what is wet and the best way to reach you. Calling does not commit you to work.

Need to talk now?1800 739 867Answered 24/7 · Our own Reztor team