Stop the water at its source, then extract as much as you can. Lift or open up the area so air reaches the underlay and the floor beneath, and run fans with a dehumidifier. A carpet that feels dry on top can still be wet underneath, so check it with a moisture meter before you call it done.
Why the carpet cleaner isn’t enough
A carpet cleaner or hired extractor pulls water out of the carpet pile. It doesn’t dry the underlay, the floorboards or slab, or the bottom of the walls. That hidden moisture is what causes the smell, lifting carpet and mould a week later.
Step by step
- Stop the water. Turn off the tap at the water meter if a pipe has burst. Keep clear of power points and appliances that water has reached.
- Work out what kind of water it is. Clean water from a burst supply pipe can often be dried. Water from a toilet, sewer or flood is contaminated, and the carpet and underlay usually need removing. Don’t try to dry it yourself.
- Extract the water. Use a wet and dry vacuum made for water. Never use a normal household vacuum.
- Get air underneath. Lift the carpet back from the corner or edge if you can, so the underlay and floor can dry. Wet underlay often holds more water than the carpet.
- Run fans and a dehumidifier. Open windows only if the air outside is drier than inside.
- Check it’s dry. Feel isn’t enough. A moisture meter shows whether the underlay and floor have dried.
How long can a carpet stay wet?
Try to start drying within 24 to 48 hours. After that, the underlay starts to smell and mould can grow, and the carpet backing can come away from the pile.
When to call a restorer
Call a restorer if more than a small patch is wet, if the water came from a toilet, sewer or flood, if it’s been wet for more than a day or two, or if it smells. We extract the water, decide what can be saved, and dry the carpet, underlay and floor with commercial drying equipment, recording moisture readings until the drying goal is met. Our IICRC-certified technicians dry wet carpets across Brisbane, the Gold Coast, Sunshine Coast, Townsville, Sydney and Melbourne.
Water in the house right now?
Call 1800 739 867, day or night. Or send your details and photos and we’ll call you back.
Call 1800 739 867 Send details & photos
Water, storm and sewage damage across Brisbane, the Gold Coast, Sunshine Coast, Townsville, Sydney and Melbourne. IICRC-certified technicians. Insurer panel member.
Questions people also ask
Can I dry wet carpet myself?
For a small area of clean water caught quickly, often yes. Larger areas, contaminated water or carpet that has been wet for days usually need professional equipment.
Do I need to replace the underlay?
Not always. Underlay soaked by clean water can sometimes be dried in place. Underlay touched by sewage or flood water should be replaced.
How long does professional carpet drying take?
Usually a few days. We take moisture readings each visit and remove the equipment once the readings show the materials are dry.
Will a fan alone dry carpet?
A fan dries the surface. Without a dehumidifier and air reaching the underlay, the moisture underneath can stay for weeks.