Reztor Restoration 24/7 emergency1800 739 867
Call 24/7 Send photos
Queensland service areasWater damage assessment & inspection
01 Start beneath the surface

Water damage assessment. Find what the surface hides.

A water damage assessment helps establish the affected areas, the condition of materials and the work to discuss next. Tell us what happened, when it started and whether the source is still active.

Make the area safe first. Keep clear of wet power points and appliances. Stop the source only if safe. If anyone is in danger, call 000.

Assessment + dryingIllustrative water damage assessment with moisture detection equipment
Look beyond the surface. We assess carpet, underlay and accessible subfloor before deciding what can be dried in place.
Process illustration
01 / CONTACT24/7 contactCall any time
02 / STANDARDIICRC Certified FirmMeasured restoration
03 / PEOPLEOur own teamNo subcontracting
04 / EXPERIENCERestoring since 2012Australian properties
02 Why assessment comes before the drying plan

A dry surface isn’t the whole story.

Underlay can hold water after the carpet pile feels dry. Skirtings and the floor beneath may need attention too.

You are not required to proceed

You are not required to go ahead with recommended works after an assessment. We can provide documentation of findings so you can decide next steps with your insurer or other trades.

Where moisture can hide beneath carpetAn illustrative building cross-section showing carpet, underlay and subfloor, with moisture moving below the apparently dry carpet surface. ILLUSTRATIVE SECTION / NOT TO SCALE Carpet pileUnderlay can retain moistureSubfloor Where moisture can hide beneath carpetA vertical illustrative cross-section showing the carpet surface, underlay that may retain moisture, and the subfloor below. ILLUSTRATIVE SECTION / NOT TO SCALE 01 Carpet pileThe surface may feel dry. 02 Underlay + subfloorRead for retained moisture beneath.
Read the layers, not just the surfaceMoisture pathways vary with the water source, materials and construction.

What does an assessment look for?

The visible patch is only one clue. Tell us where the water came from, when it started and whether it is still entering.

  1. Moisture where it should not beWe look for signs of moisture in materials and cavities, not only visible staining.
  2. Safety hazardsAssessment includes advising of dangers at the property that affect safe work.
  3. Hidden mould riskProfessionals also look for hidden signs of mould growth linked to moisture.
  4. Equipment readingsMoisture-detecting equipment helps determine how far water has spread.
  5. Source still activeA continuing leak needs stopping — drying alone will not fix the cause.
  6. DocumentationAssessment records help explain findings for insurance and reinstatement decisions.
03 The drying plan

Five steps.
No guesswork.

The water source, affected materials and site conditions shape the work. Each step builds a clearer picture of what happens next.

  1. 01

    Inspect

    Walk the affected areas and note water source, materials and access.

  2. 02

    Extract

    If standing water remains, extraction may begin as part of mitigation.

  3. 03

    Dry

    Propose a drying or remediation plan based on assessment findings.

  4. 04

    Monitor

    Use moisture readings to guide whether materials can be retained.

  5. 05

    Document

    Provide findings — you choose whether to proceed with recommended works.

04 The hidden picture

See what the surface can’t tell you.

A wet patch is one clue. Moisture readings show where water has travelled; extraction and drying address what comes next.

Illustrative moisture meter check on building materials after water damageAssess
Moisture readings and source check before drying.
Illustrative documented moisture mapping during water damage assessmentDry
Dehumidifiers and air movers, checked against readings.

Side-by-side illustrations of assessment and drying. Not documentary Reztor job photos.

05 Connected work

Connected water damage services.

Once we understand the source and affected materials, we explain the applicable next steps.

01 / WATER

Water damage restoration

Assessment, extraction and structural drying shaped around the affected rooms and materials.

Water damage services
02 / EXTRACT

Water extraction

Standing water removal, then moisture testing and drying — extraction alone is not the full job.

Water extraction
03 / MOULD

Mould assessment

If growth is present or likely, we investigate the moisture and affected materials before remediation.

Explore mould remediation
04 / RECORDS

Insurance documentation

Photos, readings and job records help explain the damage and work. Your insurer decides policy coverage.

Read about insurance claims
06 Where we attend

Assessments across our service areas.

Call with your suburb and what happened. We confirm attendance and the next step for your address.

Reztor Australia Pty Ltd
9/35 Learoyd Rd, Acacia Ridge QLD 4110

Service area Confirm your address

Call 1800 739 867 with your suburb and what happened. No suburb directory was present on this page to preserve.

Not sure which area applies? Check service areas or call 1800 739 867.

07 Good to know

Questions, answered plainly.

Every property is different. Call with your suburb, what happened and whether water is still entering.

01Why is water damage assessment necessary?

If you notice any signs of water damage, the best thing you can do is have our water damage assessment team at your property. Our experts will assess the severity of the damage and advise what actions are required for repair. This document will later be able to be used if you make a water damage insurance claim.

02Am I required to go ahead with recommended works after an inspection?

No, you are not required to go ahead with any recommended works after your water damage assessment. We are happy to provide you with the documentation without using our professional water damage services.

03What types of things will you look for in a water damage assessment?

Our water damage repair experts will look for signs of moisture in areas where water should not be present, advise of any dangers at the property, and advise on rectification steps.

04Do your water damage repair specialists check for mould?

Yes. When you engage the help from our water damage restoration company, our professionals will also look for the hidden signs of mould growth. This includes checking all areas for signs of moisture. Depending on the length of time wet, further investigation may occur, including lifting the carpet or checking inside the wall cavity. We will alert you immediately and create a plan to safely remove the mould growth from your property if mould is found.

05How do water damage Brisbane experts check for moisture after water damage?

Reztor water damage restoration professionals use high-quality moisture detecting equipment to determine the moisture present in your property. They can include: Thermal imaging camera Moisture meters Concrete moisture meters Borescope

06What can I expect to see in a water damage assessment report?

After the inspection gets finished, our skilled water damage repair technicians will also send you a detailed water damage assessment report. It contains all critical information about the extent of water damage and recommended steps of repair. The things we include within the report include: Cause of damage Water damage category Resultant damage An itemised list of damaged belongings in each room of the property Pictures of problems found during water damage assessment Recommended actions towards repair and our cost of work. Should you decide to make an insurance claim, this is what they expect.

07How much does water inspection and assessment cost?

Our water inspection and assessment charge is $198 for the first hour and then $66 per hour if additional time is required onsite. Our technicians can inspect the property as soon as we can safely attend; however, the exact price may vary depending on the property size and extent of damages.

08Do you complete any formal training?

At Reztor Restoration, developing our people to a high standard is critical to our service offering. The Institute of Inspection, Cleaning and Restoration Certi?cation (IICRC) is an independent certi?cation and standard-setting organisation for the inspection, cleaning, and restoration industries. Reztor Restoration has gained certification in the following areas: IICRC Restoration Carpet Cleaning Technician (CCT) IICRC Water Damage Restoration Technician (WRT) IICRC Upholstery & Fabric Cleaning Technician (UFT) IICRC Applied Microbial Remediation Technician (AMRT) IICRC Health & Safety Technician (HST) IICRC Carpet Repair and Reinstallation Technician (RRT) IICRC Colour Repair Technician (CRT) IICRC Applied Structural Drying Technician (ASD) IICRC Odour Control Technician (OCT) IICRC Floor Care Technician (FCT) IICRC Journeyman Fire and Smoke Restorer IICRC Journeyman Textile Cleaner IICRC Journeyman Water Damage Restorer IICRC Master Fire and Smoke Restorer IICRC Master Water Restorer IICRC Master Textile Cleaner REZTOR In-house Induction and Training REZTOR Manual Handling Working at Heights RIIWHS204D First Aid and CPR Training White Card CPCCWHSS1001 Blue Card

08 Start with clear details

Tell us what’s happened.

Share the site address, what is wet and the best way to reach you. Calling does not commit you to work.

Need to talk now?1800 739 867Answered 24/7 · Our own Reztor team