Walls are dried by moving warm, dry air across and into them with air movers and dehumidifiers, while a moisture meter tracks progress. Wet skirting boards may be removed so air can reach the cavity. Walls soaked by clean water can often be dried in place; walls soaked by sewage or flood water usually need cutting out.
Why walls stay wet
Plasterboard wicks water upward, and the cavity behind it traps moisture. The paint can feel dry while the plaster, timber or insulation inside is still wet.
How walls are dried in place
- Measure moisture at several heights to find the wet line.
- Remove skirting boards if needed, and drill small holes near the bottom to let air into the cavity.
- Run air movers along the wall and dehumidifiers in the room.
- Measure again each visit until readings match dry walls of the same type.
When the wall has to come out
If sewage or flood water reached the wall, or the plasterboard has crumbled or grown mould, the lower part is usually cut out, the cavity cleaned and dried, and new sheeting fitted.
When to call a restorer
If the wall is stained, swelling, bubbling or soft, or water sat against it for more than a few hours.
Water in the house right now?
Call 1800 739 867, day or night. Or send your details and photos and we’ll call you back.
Call 1800 739 867 Send details & photos
Water, storm and sewage damage across Brisbane, the Gold Coast, Sunshine Coast, Townsville, Sydney and Melbourne. IICRC-certified technicians. Insurer panel member.
Questions people also ask
How do I know if water is inside my wall?
Bubbling paint, swollen skirting, staining or a musty smell. A moisture meter confirms it.
Can I use a heater to dry the wall?
Heat alone can warp materials and push moisture elsewhere. Dehumidifiers and air movement do the work.
Do brick walls need drying too?
Yes. Brick and concrete hold water and can take longer to dry than plasterboard.