ClickCease

BLOG

HOW TO CLEAN CARPET AFTER FLOODING

A flood can harm your home. Furthermore, the carpet in your house will also be affected by any contamination of the air. 

When the flood occurred, chemicals or oils could have remained in place or may have penetrated the carpet fibres, leaving a noticeable smell. This article provides information and tips for cleaning up after a flood.

The following content will help you to clean your carpet after a flood.

Step 1: Check for Structural Damage and Signs of Mould

You can’t properly clean the carpet in your house if the water has caused any damage to the structure of your property. 

Call a professional restoration company immediately if you suspect any structural damage or signs that mould could be present in your house. It may also be advisable to call an electrician if there is any electrical damage that needs addressing. 

Step 2: Get Rid of Unwanted Items and Debris

Now that you have made sure your property is safe, it’s time to get rid of any unwanted items that may be lying around. 

Use a vacuum to suck up as much water as possible. Depending on how much water was involved in the flooding incident, this may take some time. Be sure to clean around any electrical components, wiring and light switches that you find.

Step 3: Clean Carpet

Following removing all items from the floor, it’s time to get a professional carpet cleaner in to tackle the cleaning job. 

You must visit your local carpet cleaning company for advice and assistance. They will be able to use their experience in water damage to give you the best advice on how to clean up after a flooding incident. 

Step 4: Deodorising and Stain Removal

After your carpet has been cleaned, it is time to tackle any odours that the flood may have left behind. 

The longer you leave the odours in your carpet, the more they can permeate. That is why you must use a product specially formulated to remove unwanted smells. 

You can use household cleaners to remove any stains that the flood has left behind. Just apply the cleaner and scrub at the stain with a stiff brush. A lot of the time, this will remove the stain. However, if it doesn’t, don’t worry – you can visit your local carpet cleaning company, and they will have access to products that can deal with stains effectively.

Step 5: Prevent Mould Growth

You can stop mould from growing in your carpet by taking some practical steps. 

For example, avoid placing furniture and other items on the carpet until it has dried out thoroughly. Any moisture left could attract mould spores that are floating around in the air, and they will then start to grow on the damp areas of your carpet. 

If you have any further questions about how to clean up after a flood, you can contact a professional flooding restoration company like Reztor Restoration for further details. They will provide you with a comprehensive list of services to help you recover from this unfortunate situation. They also provide a free, no-obligation quotation for their services. 

CONCLUSION

The key to cleaning up after a flooding incident is to take prompt action once you have realised that your carpet has been contaminated by floodwater. If you leave it too long, more damage is likely to occur. 

Some floods are so destructive they require professional help. When this happens, you can contact Reztor Restoration. They can help you to clean up after a flood and eradicate any odours and stains left behind.

Reztor Restoration is the leading expert in flood damage restoration, mould mitigation and wet carpet drying in Queensland. They offer professional, expert advice that will guide you through the process of getting your carpet back to its original state. 

In many cases, you can use a commercial dehumidifier to suck out the excess moisture in your carpet. These machines are robust and cost-effective and will clear any unwanted smells or stains effectively.

I hope that this guide has been helpful to you: best wishes and good luck with removing any unwanted carpet odours and stains.